Need help?Do you have a question about the Extech Instruments SDL100 and is the answer not in the manual?
General| Frequency Range | 31.5Hz to 8kHz |
|---|---|
| Resolution | 0.1dB |
| Type | Sound Level Meter |
| Measurement Range | 30 to 130dB |
| Humidity Range | 10 to 90%RH |
| Display | LCD |
| Data Logging | Yes |
| Power Supply | AC adapter |
| Weighting Networks | A, C |
| Time Weighting | Fast, Slow |
Provides essential safety information and international safety symbols for proper meter operation.
Explains how to select pH or ORP modes and take measurements with the meter.
Details on configuring the sampling rate for data logging from 0 seconds to 8 hours.
Detailed steps for calibrating the pH electrode using buffer solutions and the meter.
Step-by-step guide for manually logging readings to an SD card using the LOG button.
Instructions for setting up and performing automatic data logging at a user-specified rate.
Procedure for transferring datalogged data from the SD card to a PC for analysis.
Details electrical parameters like input impedance, temperature compensation, and calibration.
To Next Page