Need help?Do you have a question about the Extech Instruments SL400 and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Resolution | 0.1dB |
| Units of Measure | dB |
| Power Supply | 9V battery |
| Frequency Range | 31.5Hz to 8kHz |
| Measuring Range | 30 dB to 130 dB |
| Frequency Weighting | A, C |
| Time Weighting | Fast, Slow |
| Microphone | 1/2" Electret condenser microphone |
| Operating Temperature | 0°C to 40°C |
Avoid hazardous environments, keep dry, avoid vibration, and follow warnings.
Procedure to calibrate the meter using a 94dB sound source for accuracy.
Step-by-step guide for automatic meter calibration using a sound calibrator.
Step-by-step guide for manual meter calibration by adjusting offset values.
Instructions for starting, pausing, stopping, and handling measurement range indicators.
How to enable auto recording and interpret the 'WRITE' indicator on the display.
Steps for initiating, pausing, and stopping noise dose measurements.
Instructions for replacing the battery, including safety and disposal regulations.
To Next Page