Need help?Do you have a question about the Extech Instruments SDL350 and is the answer not in the manual?
General| Model | SDL350 |
|---|---|
| Category | Multimeter |
| Brand | Extech Instruments |
| Display Type | LCD |
| Max Voltage Measurement | 1000V |
| Max Current Measurement | 10A |
| Data Logging | Yes |
| Diode Test | Yes |
| Continuity Test | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Frequency Measurement | 10MHz |
| Temperature Measurement | -40°C to 1000°C |
| DC Voltage Range | 1000V |
| AC Voltage Range | 750V |
| DC Current Range | 10A |
| AC Current Range | 10A |
| Resistance Range | 40MΩ |
| Capacitance Range | 100µF |
| Frequency Range | 10MHz |
| Safety Rating | CAT III 1000V |
Symbol indicating the need to refer to the manual for further information.
Detailed list and description of the meter's parts and the hot wire probe.
Specifics about the hot wire probe tip, including sensor orientation and protective cover.
Explains the meter's three operating modes: Air Velocity, Thermocouple, and Air Volume.
Instructions for using the meter to measure air velocity and temperature.
Procedure for selecting measurement units for air velocity (m/s, FPM, Km/h, etc.).
Instructions for measuring temperature using Type K or J thermocouples.
Guide for measuring air volume using CFM or CMM units.
How to freeze the displayed measurement value.
How to record and recall maximum and minimum measurement values.
Instructions for turning the display backlight on or off.
Steps to reset the meter if keys become inoperable or display freezes.
Information on connecting and using the optional AC power adaptor.
Overview of the meter's data logging capabilities.
Details on SD card compatibility, insertion, and formatting for datalogging.
Procedure for manually logging readings to an SD card.
Instructions for automatically logging data at specified intervals.
Steps for transferring logged data from the SD card to a computer.
How to enter and navigate the meter's setup menu.
Procedure for setting the date and time on the meter.
Configuring the interval for automatic data logging.
Enabling or disabling the automatic power-off function.
Controlling the audible beeper for operations.
Choosing between USA (decimal) and European (comma) number formats.
Instructions for formatting an SD card for use with the datalogger.
Selecting Celsius or Fahrenheit for temperature readings.
Specifying the type of thermocouple (J or K) being used.
Setting units for air volume measurement (CFM or CMM).
Inputting duct area for accurate Air Flow (Volume) calculations.
Important safety guidelines regarding battery handling and disposal.
Overview of the meter's general technical characteristics and features.
Detailed electrical specifications for air velocity measurements.
Electrical specs for the built-in thermistor temperature sensor.
Electrical specifications for air flow volume measurements.
Electrical specs for thermocouple temperature measurements.
To Next Page