4
TH10A-en-US_V2.1 8/22
***** To use the delay function run the datalogger Graph software. Click on the
computer icon “Datalogger Setup” or select from the File pull-down menu. The
Setup window will appear, and you will see there are two options: Manual and
Instant. If you select the Manual option, after you click the Setup button, the
logger won't start logging immediately until you press the orange button in
logger's housing.
***** When the TH10 is not logging and the memory is not full, press the orange
button in the housing of the meter for 3 seconds. The green LED will flash and the
meter will begin logging. LED flash cycle is 10 second.
Caution: When the TH10 is logging and the memory is full, press the orange button in
the meter housing for 6 seconds until the red LED flashes. This will stop the
logging and delete the contents of the memory.
Specifications
Temperature Overall Range -40 to 158
o
F (-40 to 70
o
C)
Accuracy (-40 to -30 and +60 to
+70
o
C)
±1.5
o
C
Accuracy (-10 to +40
o
C) ±1
o
C
Accuracy (-40 to +14 and 104 to
158
o
F)
±2.7
o
F
Accuracy (+14 to 104
o
F) ±1.8
o
F
Logging rate Selectable sampling interval: From 2 seconds up to 24 hours
Memory 32,000 Temperature readings
Operating temperature -31 to 176
o
F (-35 to 80
o
C )
Battery type 3.6V Lithium (1/2 AA) (SAFT LS14250, Tadiran TL-4902 or
equivalent)
Battery life 1 year (typ.) depending on logging rate, ambient temperature, &
use of Alarm LEDs
Dimensions/Weight 4.0 x 1.0 x 0.9” (101 x 25 x 23mm) / 6 oz. (172g)
To Next Page
Loading...
Need help?
General
