Extra 200 - Page 66

EXT
RA - FLUGZEUGBAU GmbH
SERVICE MANUAL EXTRA 200
CHAPTER 05
PAGE 28
PAGE DATE: 1. July 1996
O 5 Check center section for delamination by coin tapping.
O 6 Detailed visual of actuator lever for damage, cracks and proper
attachment.
O 7 Detailed visual of mass balance attachment and mounting boom for
deformation, corrosion and cracks.
O 8 Detailed visual of trim tab hinges, actuator lever for damage, cracks,
excessive wear and proper bonding to the laminate. Detailed visual
for delamination.
O 9 Inspect ventilation holes for obstruction.
Surface general
O 10 Check painting for general condition (blisters etc.).
O 11 Check laminate for erosion, scratches, stone nicks and impact dam-
ages.
Fuselage
O 1 Inspect tubular steel frame visually for corrosion, scratches and
damages.
O 2 Check wing main spar attachment for damage and corrosion. Inspect
for dents and cracks.
O 3 Detailed visual of the sheet metal of the wing auxiliary spar attach-
ment for damage, corrosion. Inspect the sheet metal supports using a
fluorescent dye penetrant to insure no cracks are evident.
O 4 Detailed visual of cockpit frame visually for dents, cracks and
delaminations.
O 5 Inspect main fuselage cover visually for dents, cracks and delamination.
Flight controls
O 1 Detailed visual of torque tube for damages, cracks, free-play and stop
adjustments.
O 2 Detailed visual of bell cranks for damage, cracks, corrosion, security
of mounting and link bolts.
O 3 Inspect control rods for loose or popped rivets and general condition.
O 4 Inspect sticks (rear & front) for full travel, proper rigging, free-play,
security of mounting and direction of control surface movement with
relation to stick movement.
Inspector:
Mechanic:
Inspections
Date:
Serial No.:
1000 hours
SCHEDULED MAINTENANCE CHECKS
Significant Items Inspection