3The Source User Manual Source Operation & Making A Plant Extract
MAKING A PLANT EXTRACT
1. INSTALL THE MOBILE APP
The Source app is a great way to monitor
the time, temperature of heat being
applied, and vacuum. Information for
installation can be found under
'Mobile App' on page 10.
2. GATHER THE NEEDED SUPPLIES
You will need:
• a glass container
• up to 2 oz. plant matter
• 190-proof grain alcohol
• strainer and lters
• funnel for rebottling the alcohol
• suitable container for storing extract
3. MAKE THE TINCTURE
Place clean plant matter in a clean glass
container. Divide large pieces into similar
smaller lengths for good t. Cover with
190-proof grain alcohol to about 1/4”
above the plant volume. Allow the plant
matter to soak for 5-20 minutes or more.
See www.extractcraft.com for recipes
specific to your botanicals.
4. UNSCREW THE NICKEL PLATED
RESERVOIR CUP
Reach inside the collector and unscrew the
reservoir cup from the base.
Make the
tincture.
Supplies
Install the
app.
nickel plated
reservoir cup
To Next Page
Loading...