Need help?Do you have a question about the ExtractCraft Source Turbo and is the answer not in the manual?
General| Brand | ExtractCraft |
|---|---|
| Model | Source Turbo |
| Category | Scrubber |
| Language | English |
Potentially dangerous plant extracts due to concentrated chemical components. May be harmful if ingested or absorbed.
An easy-to-use home appliance for extracting plant essences used in flavorings, perfumes, and medicinals.
Use food-grade, grain alcohol of 190-proof and 95%. Do not use methanol (wood alcohol).
Download and install the Source app from your app store to monitor time, temperature, and vacuum.
List of items required for making a plant extract: glass container, plant matter, alcohol, strainer, funnel, storage container.
Combine plant matter and food-grade alcohol in a glass container and let it soak for 5-20 minutes or more.
Reach inside the collector and unscrew the reservoir cup from the base. Screw lightly by hand only.
Strain tincture into reservoir cup, ready the Source by checking seals, and install the reservoir cup.
Place the lid with the rubber seal facing down to create negative pressure once the Source is in operation.
Plug the Source into an outlet and turn the vacuum relief screw to the right to seal the chamber.
Press the green button or use the app to start in Normal Mode (1 slow flash) or Turbo Mode (2 slow flashes).
Monitor vacuum level rise via app. Use the ice tray on the lid to aid condensation and reduce pump activity.
Watch alcohol condensation, decide when done based on consistency, and stop the process using the button or app.
Release vacuum by turning the screw, allow parts to cool, then remove the extract and collect alcohol for reuse.
Handle glass globe carefully. Do not overtighten crucible cup. Never remove vacuum relief screw completely.
Hand wash removable parts with mild soap. Wipe the base with a damp towel; do not immerse in water.
Download the Source app from your store, then launch it. Confirm Bluetooth is ON on your device.
Tap comm icon to open dialog, refresh to find units, tap desired unit, and close screen to connect.
Use app buttons to start/stop, interpret display values (Temp, Vacuum, Time), and understand connectivity cautions.
Ask Siri or visit www.whatismyelevation.com to find your current elevation.
Plug in, hold button for 10s, observe flashes, press button per 1,000 ft up to 8,000 ft to set elevation.
Includes recipes for Rose Extract, Lavender Extract, Peach Habanero Oil, and a Lavender Topical Rub.
Provides general times for soaking various botanicals to create tinctures, aiding extraction results.
Addresses vacuum pump running continually by checking seals, relief screw, and collector integrity.
Solutions for red comm icon (Bluetooth) and no illumination of the green light (power issues).
Covers automatic shut-off due to time, process stopping unexpectedly, and verifying operation status.
Details performance, power requirements, connectivity, and physical dimensions of the Source unit.
Outlines ExtractCraft's warranty for manufacturing defects and procedures for repairs and returns.
Defines technical terms used in the manual, such as 'absolutes', 'concrete', 'flash point', and 'tincture'.
To Next Page