Limits of Responsibility
Extreme Flight provides high-quality aircraft and components to it's
customers and end users. These aircraft and components are assembled
by the end user to produce a flying model. It is beyond Extreme Flight's
control to monitor the end user's completed aircraft. Therefore, Extreme
Flight in no way accepts or assumes responsibility or liability for damages
resulting from the end user assembled product. The end user assumes all
responsibility and liability in use of Extreme Flight aircraft and components
and agreeing to hold harmless Extreme Flight, it's distributors and dealers.
Required Items
Hobby Knife
Small Phillips Screwdriver
Set Metric Allen Wrenches
Scissors
Small Pliers
Wire Cutters
Adjustable wrench
Masking tape
Drill and drill bits
Threadlocker (Blue Loctite)
Optional:
Heat gun and covering iron
Dremel tool
Assembly Instructions – Read completely before starting assembly!
UNPACK :
Unpack your airplane and examine the components. Check for damage of any kind. If you have
damage, please contact Extreme Flight to discuss. Contact info listed above.
WRINKLES :
Your airplane was packed in plastic at the factory without any wrinkles in the covering. You may
notice some wrinkles now; more likely, you will notice a few in a day or two or the first time you take
the plane out to the flying field. These wrinkles are the result of wood shrinkage and/or expansion.
Balsa wood changes size and shape slightly as it is exposed to varying humidity in the air. This is a
To Next Page
Loading...
