10. Install the receiver as shown using Velcro. Use Velcro to secure the battery to
the battery tray and use a Velcro strap around the battery.
11. Use the supplied nylon bolts to secure the wings to the fuselage.
This concludes the assembly of the Extra 300.
Radio Set-up and flight tips.
CG range for the Extra is from 3.50”- 4.00” from the leading edge of the wing
measured at the wing root. CG should be easy to achieve by moving the battery
along the length of the battery tray. Adjust to fit your flying style.
Control surface recommendations are as follows:
Elevator- 10 degrees low rates, 45+ degrees high rates.
Rudder- 20 degrees low rates, 45+ degrees high rates.
Aileron- 20 degrees low rates, 45+ degrees high rates.
Use exponential function to achieve the best “feel” for your particular flying style. I
highly recommend that you take the time to set up rates for precision flying and
separate rates for 3D. The Extra is capable of flying very precise maneuvers, and
proper rates and CG will allow you to experience this to the fullest extent. Trying to
fly precision aerobatics with 3D rates is an exercise in futility. Spend some time
dialing in and trimming your plane and you will be rewarded with a great flying
experience.
Thanks again for your business!
See you at the flying field!
12
To Previous Page
Loading...
