www.modellmarkt24.ch
6
4. Slide the wheel pant into position. Tighten the nut on the axle so that the wheel pant is
pinched between the axle and the landing gear leg. The recessed area of the wheel pant
will align with the gear and prevent it from rotating. Repeat for the other wheel pant.
5. Mount the landing gear assembly to the fuselage using the provided 3mm socket head
cap bolts and washers. Make sure to apply a drop of blue thread lock compound to the
bolts.
6. Next lets assemble the Torque 2814/820 and install it and the ESC onto the fuselage.
www.modellmarkt24.ch
To Next Page
Loading...
