Installation Guide 27
In respect to the Radio Settings, the professional installer should be aware of the
following:
•The Channels available for configuration are channels for which the product is
approved in its selected country. The professional installer must ensure the
product is set to operate under conditions, and on channels, approved by country
regulations.
• Selecting Smart as the Power setting automatically configures radio power to not
exceed the maximum power allowed by the defined country. For static power
settings, the professional installer must ensure the configured power levels are
compliant with local and regional regulations. The county selected automatically
limits the maximum output power that can be set.
• For external antenna Access Points, configure the Antenna Gain based on the
antenna used in the deployment. The set gain value should include the antenna
gain, along with any additional components, such as extension cables used
between the Access Point and the antenna.
In respect to Wireless LAN settings, at minimum, a WLAN should be created providing
some measure of security.
NOTE The above example includes a field for setting the antenna
gain. This setting is only available for external antenna
Access Points and does not display for internal antenna
Access Points.
To Next Page
Loading...
