28 AP-7522 Access Point
16. To create a new WLAN, select + Add from the upper, left-hand side of the Wireless
LAN field.
17. Set the following configuration attributes for the new WLAN:
• Name - Provide a unique name for the WLAN as its network identifier. This is a
required setting.
• Enable - Select this setting to enable this WLAN within the Access Point managed
network and provide some measure of data protection.
• SSID - Specify the WLAN's SSID. The WLAN SSID is case sensitive and
alphanumeric. SSID length should not exceed 32 characters. This is a required
setting. Select Client-To-Client Communication to enable client interoperability
within this WLAN. The default is disabled, meaning clients are not allowed to
exchange packets with other clients. It does not necessarily prevent clients on
other WLANs from sending packets to this WLAN, but if this setting is disabled on
the other WLAN, clients are not permitted to interoperate at all.
• WLAN Type - The screen displays with the Open option selected. Naming and
saving such a policy (as is) would provide no security and might only make sense
in a network wherein no sensitive data is either transmitted or received. This
default setting is not recommended.
To Next Page
Loading...
