Installation Guide 29
If selecting Secure-PSK, enter a WPA2 Key to password protect the WLAN.
Define whether the key is entered in ASCII or HEX characters. Selecting Show to
expose the key is not recommended.
If selecting Secure-802.1x, provide an IP address (or hostname) and a shared
secret (password) used to access an external RADIUS server resource
designated to validate user requests to the Access Point’s WLAN resources.
Selecting Guest displays fields for captive portal Web page creation, and is
beyond the scope of this basic Access Point configuration.
• Band -Select the 2.4 GHz and/or 5 GHz radio bands supported by the Access
Point and its connected client traffic. If this Access Point is designated as a Virtual
Controller AP, both radio bands should be enabled.
• VLAN - Use the spinner control to specify a VLAN from 1 - 4,094 for this WLAN.
When a client associates with a WLAN, the client is assigned a VLAN by load
balance distribution. Its recommended you do not use VLAN 1 with the WLAN if
the WAN port has been enabled.
• Description - Optionally enter a WLAN description to further describe the WLAN’s
deployment objective.
18. Select Apply to commit the updates to the Access Point’s WLAN configuration.
19. Expand the Configuration menu item and select Services
.
To Next Page
Loading...
