Connecting AC power
Before you begin
• Ensure to check AC power specifications for the switch.
• Ensure to check the AC power cord for international use. You must use a power cord that is
approved for the receptacle type in your country.
Procedure
1. Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet.
Note:
ERS 3500 Series does not have a power switch. When you connect the AC power cord
to a suitable AC power outlet, the switch powers up immediately.
Connecting AC power
December 2017 Installing Ethernet Routing Switch 3500 Series 41
To Next Page
Loading...
