Chapter 3: Hardware compatibility for ERS
3500 Series
This chapter lists the hardware.
Switch models
The following table describes the ERS 3500 Series models.
All switch models support autopolarity.
Model Part Number Description
ERS 3510GT AL3500A04–E6 10 port Ethernet Switch configured as:
• 8 ports of 10/100/1000BASE-T with 2 SFP
ports
• Fanless operation
• Standalone
ERS 3510GT-PWR+ AL3500A14–E6 10 port Ethernet Switch configured as:
• 8 ports of 10/100/1000BASE-T (support for
IEEE 802.3af PoE or IEEE 802.3at PoE+) with
2 SFP ports
• Dual power modes - fanless operation in Low
Power Budget mode at 60W max PoE budget,
or normal fan operation in High Power Budget
mode at 170W max PoE budget
• Standalone
ERS 3524GT AL3500A05–E6 24 port Ethernet Switch configured as:
• 24 ports of 10/100/1000BASE-T with 4 shared
SFP ports (combo with ports 21-24)
• 2 rear SFP ports can be used as additional
ports in Standalone Mode or 2 rear HiStack
ports delivering up to 10Gbps Full Duplex
Table continues…
December 2017 Installing Ethernet Routing Switch 3500 Series 10
To Next Page
Loading...
