Extreme Networks ExtremeCloud Appliance Series - Page 116

1 Go to Configure > Devices > Switches and select a switch (not the check box).
For each port, the following information is displayed:
•
Admin State
•
Name
•
Alias Function
•
Speed
•
Neighbor
•
Lag Members
•
PoE
2 Select one or more ports from the list,. Then, set the Admin State, Port Function, and PoE options to
On or O. Select Apply after each selection.
Related Links
LAG Configuration on page 116
Advanced Switch Settings on page 118
Switch Port Configuration on page 116
LAG Configuration
To configure a Link Aggregation Group (LAG):
1 Select New LAG to set a Master Port.
2 Select the Master Port number from the drop-down field.
Note
Dialog options display for the master port after you select a port number.
3 Select a Member Port number under Ports Eligible for LAG membership. Then, drag and drop the
port onto the Master Port pane.
4 Click Save Master.
Related Links
Configuring a Switch on page 115
Advanced Switch Settings on page 118
NEW!
Switch Port Configuration
To access port configuration,
1 Go to Configure > Devices > Switches.
2 Click on a switch.
3 Click on a port in the Name column.
Configure the following parameters for individual switch ports:
Name
Port name.
Alias (Optional) A user-friendly name used as an alias for the port.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 116