Extreme Networks ExtremeCloud Appliance Series

To Next Page

To Previous Page

Associated Proﬁles on page 129

Policy Role Settings

Table 55: Role Parameter Settings

Field Description

Name Name of the role.

Bandwidth Limit Select this option to allow unlimited bandwidth. Click to set the

Class of Service value.

Default Action Determines the access control default action. If you do not deﬁne

policy rules for a role, the role's default action is applied to all trac

subject to that role. However, if you require user-speciﬁc ﬁlter

deﬁnitions, then the ﬁlter ID conﬁguration identiﬁes the speciﬁc role

that is applied to the user. Valid values are:

•

Allow. Allow packets using the speciﬁed VLAN option. Specify

either the Default Network VLAN or a conﬁgured VLAN.

•

Deny. Deny packets that do not match a ﬁlter rule or deny packets

when a ﬁlter rule does not exist. When a packet does match the

ﬁlter rule action Allow, allow packet using the speciﬁed VLAN

option. Specify either the Default Network VLAN or a conﬁgured

VLAN.

VLAN ID Policy roles default to the VLAN speciﬁed during network

conﬁguration. You can specify a unique VLAN here. Click to add a

new VLAN option.

Associated Proﬁle

Indicates proﬁles that this role is associated with. Click to modify

proﬁle association.

Note: Associate a role with a conﬁguration Proﬁle. The conﬁguration

Proﬁle is associated with the device group. Each AP in the device

group makes use of the policy role.

Rules Policy rules are organized by Open Systems Interconnection (OSI)

layer classiﬁcation. Select the drop-down arrow to display rules that

pertain to each OSI layer.

Extreme Networks ExtremeCloud Appliance Series - Page 129