Extreme Networks ExtremeCloud Appliance Series - Page 144

Adoption Rule Settings
Configure the following parameters to create an adoption rule:
Site Select the site associated with the adoption rule. The site holds the device group. The device group
includes the APs that meet the filter criteria.
Device Group Select a device group that will contain the APs that meet the filter criteria.
Filter Parameters
IP Address/CIDR Filter the APs by IP address, adopting APs into the specified device group based on their IP
address. CIDR field is used along with IP address field to find the IP address range.
Host Name Filter the APs by host name, adopting APs into the specified device group based on their host
name. This field matches on sub strings. The full host name is not required for a match.
Model Model number on the AP. This field matches on sub strings. The full model number is not
required for a match.
Serial Number Serial number on the AP. Serial number requires an exact string match.
Related Links
Adding or Editing Adoption Rules on page 143
AP Adoption Rules on page 142
Deleting Adoption Rules on page 144
Deleting Adoption Rules
All device groups and AP adoption rules can be deleted. When a device group is deleted, all the AP
adoption rules that reference that device group are deleted from ExtremeCloud Appliance.
To delete a device group:
1 Go to Configure > Adoption and click on an adoption rule in the list.
2
Click .
A confirmation dialog displays.
3 Click OK.
Related Links
AP Adoption Rules on page 142
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 144