Table 72: Access Control Group Settings (continued)
Field Description
Group Type Criteria by which the accounts are grouped. Valid values are:
•
End System - MAC
Possible entry values are:
•
MAC Address
•
MAC Mask
•
MAC OUI (Organizationally Unique Identifier)
•
End System Hostname
•
End System IP Address
•
End System LDAP Host Group
•
User - LDAP User Group. Lookup to LDAP server
•
User - RADIUS User Group. Lookup to RADIUS server
•
User - User name. Lookup to local Password Repository
•
Device Type.
Group Mode For End System LDAP Host Groups only — Specify whether to match
any or match all of the LDAP attributes. The Exists mode checks to
see if the host is present in the LDAP group. Valid values are:
•
Match All
•
Match Any
•
Exists
Group Entries A list of entries for the group. Use the Search field to search for an
entry.
Related Links
Working with Group Entries on page 166
Cloning Groups on page 167
Managing Access Control Groups on page 165
Default Groups Provided with Your Installation on page 167
Working with Group Entries
To work with Access Control Group entries:
1 Go to Onboard > Groups.
2 Select a group from the list.
3 To add a new group entry:
1 Click Add Entry.
2 Add an entry with a description.
4 To delete an entry:
1 Select an entry from the Entry list.
2
Click .
Onboard
ExtremeCloud Appliance User Guide for version 4.36.03 166
To Next Page
Loading...
