A confirmation dialog displays.
Figure 31: Delete AP in Workflow
3 Click OK to delete the component.
Related Links
How to Navigate Using Workflow on page 175
Adding Components from Workflow on page 179
Modifying a Component
You can easily modify any component that has focus at the center of the Workflow page.
1 Select the component that has the focus.
Depending on the properties of the component that has focus, you are presented with one of the
following:
•
Component list
•
Details page
•
Configuration page
2 Modify the component configuration as necessary and click Save.
Example: Profile Modification
1 Go to Tools > Workflow and select the Profile icon.
2 If there is more than one profile available, select a specific profile from the list.
(If there is only one profile, the Edit Profile page displays. Skip to step 4.)
The specific profile gains focus at the center of the Workflow page.
3 Select the profile component that has the focus to display the Edit Profile page.
4 To modify profile settings, select a profile tab.
Note
If you are editing a specific profile type (for example, IoT), the Edit Profile page opens with
that tab selected.
Example: Network Modification
1 Go to Tools > Workflow and select the Network icon.
2 If there is more than one network available, select a specific network from the list.
(If there is only one network, the network configuration settings display. Skip to step 4.)
The specific network gains focus at the center of the Workflow page.
3 Select the specific network that has the focus to display the network configuration settings.
Related Links
Adding or Editing a Configuration Profile on page 68
Network Service Settings on page 119
Tools
ExtremeCloud Appliance User Guide for version 4.36.03 181
To Next Page
Loading...
