1 Go to Tools > Logs > Audit.
2 (Optional) Search for a specific audit log.
3 Set a filter or use the default filter.
4 Press Enter to execute a search.
The audit log list is updated.
5 (Optional) Select to export the data and manage which columns display.
Related Links
System Logging Configuration on page 203
Understanding Date and Time on page 20
Setting a Logging Filter on page 184
View AP Logs
If configured to do so, ExtremeCloud Appliance logs all AP events. You can view a record of the AP
event in the user interface.
Note
Go to Administration > System > Logs and enable Send Station Events before viewing
station logs.
AP log files include the following information:
•
Date and timestamp
•
AP Name
•
The severity type for the event
•
Message
To view AP log files:
1 Go to Tools > Logs > AP Logs.
2 (Optional) Search for a specific AP log.
3 Set a filter or use the default filter.
4 Press Enter to execute a search.
The AP log list is updated.
5 (Optional) Select to export the data and manage which columns display.
Related Links
System Logging Configuration on page 203
Understanding Date and Time on page 20
Setting a Logging Filter on page 184
Setting a Logging Filter
Create Date/Time filters to display entries that were logged around that time. To set a date and time
filter for an ExtremeCloud Appliance:
Tools
ExtremeCloud Appliance User Guide for version 4.36.03 184
To Next Page
Loading...
