Extreme Networks ExtremeCloud Appliance Series - Page 189

Table 76: Interface Parameters (continued)
Field Description
IP Address For an Admin topology, the Layer 3 check box is selected
automatically. The IP address is mandatory for a Physical topology.
This allows for IP Interface and subnet configuration together with
other networking services.
CIDR CIDR field is used along with IP address field to find the IP address
range.
FQDN Fully-Qualified Domain Name
DHCP Dynamic Host Configuration Protocol allows network administrators
to centrally manage and automate the assignment of IP addresses
on the corporate network. DHCP sends a new IP address when a
computer is plugged into a dierent place in the network. The
protocol supports static or dynamic IP addresses and can
dynamically reconfigure networks in which there are more
computers than there are available IP addresses. Valid values are:
•
None
•
Local Server. Indicates that the ExtremeCloud Appliance is used
for managing IP addresses.
Related Links
Certificates on page 152
Add a Static Route
Static Routes define the default route to ExtremeCloud Appliance for legitimate wireless trac. You
must be a system administrator to add a static route.
Note
Static Routes aect the settings for the Default Gateway IP address under Host Attributes.
Adding a default static route (0.0.0.0/0) changes the Default Gateway IP address.
To add a static route, take the following steps:
1 Go to Administration > System.
2 Under Static Routes click Add.
The Create New Static Route dialog displays.
3 Configure the following parameters:
Table 77: Static Route Parameters
Field Description
Destination IP address of the destination ExtremeCloud Appliance appliance.
CIDR CIDR field is used along with IP address field to find the IP address
range.
Gateway Gateway address of the ExtremeCloud Appliance appliance of any
Admin or physical interfaces (B@AC L3 VLAN).
Administration
ExtremeCloud Appliance User Guide for version 4.36.03 189