Extreme Networks ExtremeCloud Appliance Series

To Next Page

To Previous Page

Availability Link Status

Once an Availability Pair is conﬁgured, the synchronization status between the paired appliances is

displayed on the Dashboard Network Health chart. Table 4 describes each possible link status.

Note

Both client and AP statistics remain available on both sides of an availability pair. However,

cross-appliance statistical data can be aected if a mobile user is roaming across multiple APs

when the availability pair connection between the appliances is down.

Table 4: Synchronization Status for an Availability Pair

Status Description

Unknown Link is down.

Synchronized All changes are pushed to the peer appliance.

Note: There may be a brief period when a change on the ﬁrst appliance has not yet

been pushed to the second appliance. During this time, you could see "Changed" on

one appliance and "Synchronized" on the other appliance. This will be resolved as

soon as the change has successfully been pushed to the second appliance.

Synchronizing Changes are being pushed to the peer.

Changed Not synchronized. There are pending changes that have not been pushed to the peer

appliance.

Failed Synchronization failed.

Extreme Networks ExtremeCloud Appliance Series - Page 26