•
View clients associated with a selected device.
•
View map zones for AP location.
Related Links
Viewing a Floor Plan on page 30
Floor Plans on page 16
Configuring a Floor Plan on page 96
Viewing a Floor Plan
Once the floor plan is configured, view it from a selected site's dashboard. The floor plan represents
placed devices and associated badges that show configuration and performance data for the device.
From the Floor Plans view, you can toggle between floors, filter data, and further fine-tune the map
display.
To access Floor Plans view, go to Monitor > Sites, select a sight and click Floor Plans.
If one or more floor plans exist, available floor plans display in the right-side pane.
Here are a few things you can do with a floor plan:
•
To search for devices:
•
Click the search icon .
•
Click on the search field and select device from the drop-down list.
•
To zoom in and out, do one of the following:
•
Click to zoom in.
•
Click
to zoom out.
•
Double-click on the map to zoom in. Use the mouse scroll wheel to zoom out.
•
Click the map and use the mouse scroll wheel to zoom in and out.
•
Check device Status:
Table 7: Device Status from the Floor Plans View
Status Description
AP is in-service, operating.
In-service, trouble.
Critical. Indicates that ExtremeCloud Appliance cannot
communicate with the AP.
Unknown. AP is unknown to the displayed floor plan based on floor
plan filter settings. Typically occurs when the device group for the
AP is not selected.
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 30
To Next Page
Loading...
