Figure 13: Push-Pin Reading for Heatmap Values
You also have the option to Select All APs or Deselect All APs. Use these options in addition to
individual AP selection to more easily control which APs are selected.
Use Cases: If you want all but one AP selected:
1 Click Select All.
2 Right-click on the AP that you don't want.
3 Click Exclude AP from Simulations.
If you only want one AP selected:
1 Click Deselect All APs.
2 Right-click the AP that you do want selected.
3 Clear the check box Exclude AP from Simulations.
Related Links
Positioning Heatmaps on page 39
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 38
To Next Page
Loading...
