Ethernet port (GE1 POE) connected to an AT switch port and Ethernet port (GE2) not
connected
Ethernet port (GE2 POE) connected to an AT switch port and Ethernet port (GE1) not
connected
Both Ethernet port (GE1) and Ethernet port (GE2 POE) connected to an AT switch port
External power supply.
•
Low Power Mode
When power source is AF (14.5W), the AP operates in Low Power mode with limited
performance. The AP560 operates in Low Power mode when GE1 or GE2 is connected to AF
switch port and no external power is connected. The following are AP560 Low Power Mode
limitations:
MODE 1: dual band concurrent and MODE 2: sensor and 5GHz data forwarder:
Radio 1 will be limited to 2x2 and max power 16dBm
Radio 2 will be limited to 2x2 and max power 16dBm
MODE 3
Radio 1 will be limited to 2x2 and max power 18dBm
Radio 2 will be limited to 2x2 and max power 0dBm (providing no service).
The AP560 is oered in a product bundle that targets the installation environment. Refer to Table 9
and Table 10 on page 44 for descriptions of each product bundle.
Table 9: AP560i portfolio
AP Model Number Description
AP560m-FCC The AP560m is a pole-mount bundle that includes the AP560i
access point and the following brackets:
•
KT-147407-02 bracket kit
•
KT-150173-01-ExtArm
Features include:
•
Outdoor, one 2.4GHz radio and one 5GHz radio
•
4x4 on both radios
•
Software Programmable
•
Internal Antenna
•
Mounting Brackets included.
For more information, see the AP560m documentation.
AP560u-FCC The AP560u is an under-seat solution bundle that includes the
AP560i access point and the following items:
•
EIO-03 under-seat housing kit
•
WS-EIO-02 Silicone rubber kit (#30524)
Features include:
•
Outdoor, one 2.4GHz radio and one 5GHz radio
•
4x4 on both radios
•
Software Programmable
•
Software Selectable Internal Antenna
For more information, see the AP560u documentation.
Monitor
ExtremeCloud Appliance User Guide for version 4.36.03 43
To Next Page
Loading...
