Table 39: ExtremeWireless WiNG AP Scan Settings (continued)
Field Description
Scan Sample Count A client awareness count (number of clients 1 - 255) for O Channel
Scans of either the 5 GHz or 2.4 GHz band. Channel scanning is
avoided when the number of clients associated with the AP radio is
greater than or equal to the value configured here.
Client Aware Scanning A client awareness count (number of clients 1 - 255) for O Channel
Scans of either the 5 GHz or 2.4 GHz band. Channel scanning is
avoided when the number of clients associated with the AP radio is
greater than or equal to the value configured here.
Power Save Aware Scanning Defines scanning for power save clients. Valid values are:
•
Dynamic. Disables smart monitoring when buered data exists at
the radio for a power save client. The default setting is Dynamic for
both the 5 GHz and 2.4 GHz bands.
•
Strict. Disables smart monitoring when a power save capable client
is associated to a radio.
•
Disable. Do not use the Power Save Aware Scan option.
Voice Aware Scanning Defines how voice aware recognition is configured for Smart RF. Valid
values are:
•
Dynamic. Disables smart monitoring when buered data exists at
the radio for a voice client. The default setting is Dynamic for both
the 5 GHz and 2.4 GHz bands.
•
Strict. Disables smart monitoring when a voice client is associated
to a radio.
•
Disable. Do not use the Voice Aware Scanning option.
Transmit Load Aware Scanning [%] Defines the threshold for channel load. Channel scanning is avoided
when channel load is greater than or equal to this value.
Related Links
Basic RF Management Settings on page 87
Channel and Power Settings on page 88
Neighbor Recovery Settings for Smart RF on page 93
Interference Recovery Settings for Smart RF on page 94
Neighbor Recovery Settings for Smart RF
Neighbor recovery involves automatic recovery for failed or faulty access points or faulty antennas by
instructing neighboring APs to increase their transmit power to compensate for the coverage loss. The
default Smart RF policy enables Neighbor Recovery for ExtremeWireless WiNG APs and AP5xx. It
requires a minimum of four APs to function.
Note
Before you can edit these parameters, select Custom Sensitivity from the Basic Smart RF
configuration tab.
Click Recovery > Neighbor Recovery and configure the following parameters.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 93
To Next Page
Loading...
