Table 41: Smart RF Interference Recovery Settings (continued)
Field Description
Channel Hold Time Defines the minimum time between channel changes during neighbor
recovery. Set the time in seconds (1- 86,400). This setting prevents
rapid channel changes.
Client Threshold Defines the number of clients that must be associated with a radio
channel to initiate a interference recovery override. When the client
threshold is met, the associated channel remains fixed regardless of
the interference level on the channel. Valid values are 1 - 255. The
default is 255.
5 GHz Channel Switch Delta (dBm) Defines the threshold for initiating a channel switch on the 5GHz radio.
Smart RF compares the dierence between interference levels on the
current channel and a prospective channel. If the dierence is below
the configured threshold, the channel does not change. Valid values
are 5 - 35 dBm. The default setting is 5 dBm.
2.4 GHz Channel Switch Delta (dBm) Defines the threshold for initiating a channel switch on the 2.4 GHz
radio. Smart RF compares the dierence between interference levels
on the current channel and a prospective channel. If the dierence is
below the configured threshold, the channel does not change. Valid
values are 5 - 35 dBm. The default setting is 5 dBm.
Related Links
Basic RF Management Settings on page 87
Channel and Power Settings on page 88
Scan Settings for Smart RF on page 92
Neighbor Recovery Settings for Smart RF on page 93
NEW!
Select Shutdown Settings
Select Shutdown is intended for high-density deployment designs focused on 5GHz coverage. It
identifies and hides redundant 2.4GHz radios, thus reducing the overall CCI (Co-Channel Interference ).
Hidden radios are still on and will send Neighbor Reports. Select Shutdown is disabled by default.
From Select Shutdown configure parameters that will maintain CCI levels within specified limits.
Configure the following parameters:
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 95
To Next Page
Loading...
