Non-Standard Ceiling Grid or Wall Installation
Note
For all non-standard ceiling grid installation or wall installation instructions, refer to the Wi-Fi
6 802.11ax Access Points Accessories Guide.
The access point can be installed on a non-standard ceiling grid using the following accessories:
Order part number Description
AH-ACC-BKT-AX-TB
Note: Only this bracket is included with the access
point
Mounting bracket for 15/16 in. or 9/16 flat, T-bar
ceiling grid, walls or solid surfaces with the
associated screws and anchors
AH-ACC-BKT-AX-IL Mounting bracket for 9/16 in. wide T-bar with
protrusion
Install the Access Point Non-Standard Ceiling Grid or Wall Installation
ExtremeWireless™ Indoor Access Point AP4000 17
To Next Page
Loading...
