Install the Access Point
Box Contents on page 13
Position the Access Point before Installation on page 13
Install the Access Point on a Standard Ceiling Rail on page 14
Non-Standard Ceiling Grid or Wall Installation on page 18
Lock the Access Point after Installation on page 22
AP410C access point pre-installation checklist.
About This Task
Install the access point on a flat surface such as a wall or to a standard dropped ceiling grid rail. For
bracket and accessories information, see Extreme Networks 11.ax Access Points Accessories Guide.
Procedure
1. Verify the box contents.
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact Extreme Networks Support.
3. Read and review the safety guidelines.
Box Contents
Details about AP410C access point box contents.
When you purchase the access point, ensure that the following items are available in the box:
• An AP410C access point
• Mounting bracket for prelude T-bar ceiling installation (part number AH-ACC-BKT-AX-TB)
• Read Me card
Position the Access Point before Installation
Details about access point pre-installation position.
There is a red dot on the back of the access point and the bracket that will work as a guide to position
the access point for installation. Line up the red dot on the access point and the bracket for ease of
installation.
ExtremeWireless™ AP410C Access Point
13