Extreme Networks Summit Summit24 - Page 20

20 Summit24e3 Switch Quick Reference Guide
Interior Gateway Routing Protocol Commands
Command Description
config rip add vlan [<name> | all] Configures RIP on an IP interface. When an IP interface is
created, per-interface RIP configuration is disabled by default.
config rip delete vlan [<name> | all] Disables RIP on an IP interface. When RIP is disabled on the
interface, the parameters are not reset to their defaults.
config rip garbagetime {<seconds>} Configures the RIP garbage time. The timer granularity is 10
seconds. The default setting is 120 seconds.
config rip routetimeout {<seconds>} Configures the route timeout. The default setting is 180 seconds.
config rip rxmode [none | v1only | v2only |
any] {vlan <name>}
Changes the RIP receive mode for one or all VLANs. Specify:
■ none — Drop all received RIP packets.
■ v1only — Accept only RIP v1 format packets.
■ v2only — Accept only RIP v2 format packets.
■ any — Accept both RIP v1 and v2 packets.
If no VLAN is specified, the setting is applied to all VLANs. The
default setting is any.
config rip txmode [none | v1only | v1comp |
v2only] {vlan <name>}
Changes the RIP transmission mode for one or all VLANs.
Specify:
■ none — Do not transmit any packets on this interface.
■ v1only — Transmit RIP v1 format packets to the broadcast
address.
■ v1comp — Transmit RIP v2 format packets to the broadcast
address.
■ v2only — Transmit RIP v2 format packets to the RIP
multicast address.
If no VLAN is specified, the setting is applied to all VLANs. The
default setting is v2only.
config rip updatetime {<seconds>} Changes the periodic RIP update timer. The default setting is 30
seconds.
config rip vlan [<name> | all] cost <number> Configures the cost (metric) of the interface. The default setting
is 1.
disable rip Disables RIP.
disable rip aggregation Disables the RIP aggregation of subnet information on a RIP v2
interface.
disable rip export [static | direct] metric
<metric> {tag <number>}
Disables the distribution of non-RIP routes into the RIP domain.
disable rip originate-default Disables the advertisement of a default route.
disable rip poisonreverse Disables poison reverse.
disable rip splithorizon Disables split horizon.
disable rip triggerupdates Disables triggered updates.