Extreme Networks Summit X670-G2 Series User Manual

Fiber Optic Ports and Optical Safety
Summit X670-G2 Series Switches Installation Note
16
Taiwan Warnings
Korea EMC Statement
Fiber Optic Ports and Optical Safety
The following safety warnings apply to all optical devices used in Extreme Networks equipment that
are removable or directly installed in an I/O module or chassis system. Such devices include but are not
limited to gigabit interface converters (GBICs), small form factor pluggable (SFP) modules (or
mini-GBICs), QSFP+ modules, XENPAK transceivers, and XFP laser optic modules.
WARNING!
Laser optic modules become very hot after prolonged use. Take care when removing a laser optic module
from the module or option card. If the laser optic module is too hot to touch, disengage the laser optic module and
allow it to cool before removing it completely.
警告:此为A级产品，在生活环境中，该产品可能造成
线电干扰。在这种情下，可能需要用户对干扰采取切
实可行的措施。

Extreme Networks Summit X670-G2 Series Specifications

General

Brand	Extreme Networks
Model	Summit X670-G2 Series
Category	Switch
Language	English