Extron electronics AVT 200HD - Page 57

AVT 200HD Tuner • Remote Configuration and Control 51
Command
ASCII Command
(Host to Tuner)
Response
(Tuner to Host)
Additional Description
Audio Output (continued)
Select output language
EX*
LANG
}
Lang
X*]
Set the language of the output
to
X*
. For
X*
:
0 = English
1 = Spanish
2 = French
View language
E
LANG
} X*]
Show the selected output
language.
Audio mute, all outputs
1Z
}
Amt1
]
Mute the audio.
Audio unmute
0Z
Amt0
]
Turn the audio mute off.
Audio mute–S/PDIF
2Z
}
Amt2
]
Mute S/PDIF audio only.
View audio mute status
Z
X3#]
View audio mute status
X3#
.
For
X3#
:
0 = unmuted
1 = muted
2 = only S/PDIF audio muted
Set volume level
X1$
V Vol
X1$]
Set the volume level to
X1$
.
X1$
= 0–100%.
(Default = 100%.)
Increment volume level
+V
Vol
X1$]
Increase the volume level by one
step (to
X1$
).
Decrement volume level
–V
Vol
X1$]
Decrease the volume level by one
step (to
X1$
).
View volume level
V
X1$]
View the current volume level.
V-chip Setup (Parental Control)
Personal Identification Number (PIN) Setup
NOTE: To enter any V-chip setup command, you must enter the assigned 4-digit PIN to access V-chip setup. The default
PIN is 0000.
Change V-chip PIN
E
P
X3@
*new PIN VCHP
}
VchpP new PIN
]
Set a new 4-digit PIN for the
access to the V-chip.
X3@
= previous PIN number.
Example:
E
P6842*8021VCHP
}
VchpP8021
]
The V-chip PIN number has been
changed from 6842 to 8021.
View PIN number
E
Q VCHP
} X3@]
In verbose mode:
VchpQ
X3@]
If no PIN has been assigned,
X3@
is 0000 (default).
Reset PIN number
E
P
X3@
*VCHP
}
VchpP0000
]
Set V-chip PIN
X3@
to 0000
(default).
Movie rating setup
Set V-chip for movie ratings
E
M
X3@
*
X2!
VCHP
}
Vchp M
X2!]
Set movie ratings
X2!
to be
blocked by the V-chip.
For
X2!
:
0 = unblock all ratings
(default).
1 = Block G, PG, PG13, R,
NC17, and X.
2 = Block PG, PG13, R,
NC17, and X ratings.
3 = Block PG13, R, NC17, and
X.
4 = Block R, NC17, and X.
5 = Block NC17 and X.
6 = Block X ratings only.