Date/Time Settings Fields
The Date/Time settings fields (see figure 65) provide a location for viewing and setting
the time functions.
Figure 65. Date/Time Settings Fields
Change the date and time settings as follows:
1. Click the desired variable box. Adjustable settings include month, day, year, hours,
minutes, AM/PM, and (time) zone. A drop-down box appears (the year drop-down
box is selected in figure 65).
2. If all variable selections are not visible, click and drag the slider or click the up
button or down button until the desired variable is visible.
3. Click the desired variable.
NOTE: If setting the time, set the local time. The Zone variable allows you to
then select the offset from Greenwich Mean Time (GMT).
The Zone field identifies the standard time zone selected and displays
the amount of time, in hours and minutes, the local time varies from GMT
international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. If appropriate, click the Daylight Savings selection to turn on the daylight savings
time feature.
NOTE: When Daylight Saving Time is on, the device automatically updates its
internal clock between Standard Time and Daylight Saving Time in the spring
and fall on the date the time change occurs in the country or region selected.
When Daylight Saving Time is turned off, the device does not adjust its time
reference.
6. Click Submit to enter the changes.
DMP64 • HTML Operation 125
To Next Page
Loading...
