Extron electronics DMP 64 - Presets Drop-Down; Mode Buttons

Presets Drop-down
Displays a list of up to 32 presets. Select a preset from the list to
display it in the window and either activate it (Recall), abort the
selection without either recalling or deleting it (Cancel), or delete it
(Delete).
NOTE: An asterisk in the drop-down list indicates a partial preset exists only in
the DMP64 and has not been uploaded to the DSPConfigurator.
Mode Buttons
Provides selection between Live mode and Emulate mode. See
Emulate Mode and Live Mode on page76 for more information.
Backup
When in Live mode (connected to a DMP64), if presets exist in the DMP64 that are not
present in the DSPConfigurator program (indicated by an asterisk next to the preset
name), the function halts and prompts the user to run a backup.
Backup (File>Backup) transfers all partial presets plus the current configuration from
the DMP64 to a DSP configuration (.edc) file within the DSP Configurator program and
then displays a prompt to save the file to the hard drive. Backup is unavailable when the
DSPConfigurator program is in Emulate mode.
DMP64 • Software Control 26