Figure 15. DMP64 Configurator Program
The DSP Configurator program window consists of an input and virtual return signal
processor chain, the main mixer, virtual send and receive (secondary) mixers, and an
output signal processing chain.
a Mic/Line Input Gain control f Output signal processor chain
b Mic/line input signal processor chain g Output volume control
c Mic/Line input pre-mixer gain h Virtual Bus signal processor chain
d Primary Mix-points i Virtual Bus Return (primary) mix-points
e Output trim control (post-mixer trim) j Virtual Bus Send (secondary) mix-points
DMP64 • Software Control 19
To Next Page
Loading...
