Extron electronics XTP II CrossPoint 1600 User Manual

2. Click the Firmware link (see figure 65,
2
on the previous page).
3. Select the desired firmware file to download and click Download (
3
).
TIP: Click the desired Filter By: letter to jump to the correct page of downloads.
4. Enter the requested personal information (
4
).
TIP: Click Remember Me to eliminate step 4 in future downloads.
5. Click Download to copy the software or firmware to your computer (
5
).
6. Click Run to confirm that you want to run the installation (
6
).
7. Click Run twice (see figure 66,
1
on the next page). The PC downloads the firmware
update from the Extron Website and starts the Extron Installation Program to extract the
firmware file.
8. Click Next (
2
). The program extracts the firmware files and places them in a folder
identified in the InstallShield Wizard window. Note the folder to which the firmware file is
saved.
9. Click Finish to exit the program (
3
).
10. Connect the PC to the XTP II CrossPoint switcher via the LAN port of the switcher.
11. Access the XTP II CrossPoint switcher using HTML pages (see Download the
Startup Page on page 120).
XTP II CrossPoint 1600, 3200, and 6400 Switchers • HTML Operation
131

Extron electronics XTP II CrossPoint 1600 Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint 1600
Category	Matrix Switcher
Language	English