Need help?Do you have a question about the Extron electronics 100 and is the answer not in the manual?
General| Video Inputs | 8 |
|---|---|
| Video Outputs | 8 |
| Input Signal Types | RGB, Component Video, S-Video, Composite Video |
| Output Signal Types | RGB, Component Video, S-Video, Composite Video |
| HDTV Compatible | Yes |
| Inputs | 8 |
| Outputs | 8 |
| Signal Types | RGB, Component Video, S-Video, Composite Video |
| Control | RS-232 |
| Rack Mount | Yes |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 10% to 90%, noncondensing |
Details the various types of Input/Output modules available for the Matrix 100 switcher.
Outlines the core functionalities and capabilities of the Matrix 100 switcher.
Covers the connection methods for various RGB signal types and required adapters.
Describes the operation of the QS-FPC for local control of Matrix 100 functions.
Explains how to create, view, and store ties, configurations, and presets using the QS-FPC.
Procedure for safely opening the Matrix 100 unit to access internal components.
Detailed steps for installing an audio module into the Matrix 100.
Procedure for installing various I/O modules (MRAM, Sync, Composite Video) into the rear panel.
Overview of the software used to control the Matrix 100/200 from a Windows PC.
Identifies and describes the various control ports available on the Matrix 100 rear panel.
Describes how a host system initiates communication and receives responses from the Matrix 100.
Provides an explanation of specific RS-232 commands for controlling the Matrix 100.
To Next Page
