Need help?Do you have a question about the Extron electronics DTP CrossPoint 4K Series and is the answer not in the manual?
General| Model | DTP CrossPoint 4K Series |
|---|---|
| Video Input | HDMI, DTP |
| Video Outputs | HDMI, DTP |
| Resolution Support | Up to 4K@60Hz |
| Scaling | Yes |
| Audio Support | Embedded audio, analog audio |
| Audio Switching | Yes |
| HDMI Support | Yes |
| HDCP Compliance | Yes |
| Maximum Data Rate | 18 Gbps |
| Color Bit Depth | Up to 12-bit |
| Control | RS-232 |
| Power Supply | 100-240V AC, 50/60Hz |
| DTP Distance | Up to 330 ft (100 m) |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 10% to 90%, non-condensing |
| Video Inputs Count | Varies by model (e.g., 8x4, 8x6, 8x8, 10x4, 10x8, 12x8) |
| Video Outputs Count | Varies by model (e.g., 8x4, 8x6, 8x8, 10x4, 10x8, 12x8) |
Defines symbols used for warnings, attention, notes, and tips.
Explains how commands, responses, and paths are formatted in the guide.
Describes the content and purpose of the user guide.
Introduces the DTP CrossPoint 4K Series matrix switchers and their capabilities.
Explains the proprietary DTP signals and their transmission over STP cable.
Defines key terms used throughout the guide for Extron matrix switchers.
Lists and describes the key features and capabilities of the DTP CrossPoint 4K Series.
Provides a step-by-step checklist for preparing and performing the physical installation.
Details the connections and features found on the rear panel of the switcher.
Describes the front panel USB port for configuration and communication.
Identifies and explains the functions of the front panel buttons and indicators.
Details procedures for using the front panel controls for configuration and operation.
Explains the reset functions available on the rear panel of the switcher.
Describes how to route RS-232 control signals over Ethernet via the matrix switcher.
Provides steps to diagnose and resolve common operating problems with the switcher.
Offers blank worksheets to record system configurations for presets.
Describes the available ports (serial, USB, Ethernet) for controlling the switcher.
Details the RS-232 serial port, its default protocol, and configuration options.
Covers considerations and procedures for installing and operating the Extron software.
Explains the features and use of the Extron Product Configuration Software (PCS).
Details the Extron DSP Configurator program for audio setup and control.
Guides on adjusting audio levels, gain structure, and processor settings for optimal sound.
Describes how to access the switcher's web interface via a browser.
Explains how to modify network and communication settings through the web interface.
Details the process for updating the switcher's firmware using the web interface.
Guides on setting administrator and user passwords for accessing the switcher.
Explains how to synchronize or manually set the switcher's internal clock.
Describes SIS commands for controlling audio levels, gain, and mixing parameters.
Provides instructions for rack-mounting the switcher.
Details the process for replacing button labels on the front panel.
To Next Page
