DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 143
Ducker Priority Tutorial
Insert a ducker using one of the
Double-click the block,
then click Ducker
Right-click the box to open context
menu, then click Insert Ducker
-or-
methods at right.
Once inserted, double-click on the
ducker block to open the Ducker
Configuration dialog box. The
Enable Source Mic/Line box is
checked.
Set a ducking source
The first inserted mic ducks all selected targets.
1. Insert a ducking processor to mic 1.
2. Open the ducker configuration box and select the desired duck targets (see figure 77).
In this example, post-matrix 1 through 4 are the ducking targets.
Figure 77. Set a Ducking Source
Any signal on mic 1 that exceeds the ducking threshold now ducks mics 2 through 4.
Set an additional ducking source
The ducking processor can also have an additional input duck other targets using the
priority feature. The second input ducks its selected duck targets, and can also be ducked
by the first ducking source.
1. Insert a ducking processor on the additional ducking source. In this example, mic 2 is
the second ducking source (see figure 78).
Figure 78. Set a Second Ducking Source
To Next Page
Loading...
