Extron electronics DTP CrossPoint 4K Series - Command and Response Table for Matrix Switcher Commands

DTP CrossPoint 4K Series Matrix Switchers • Programming Guide 71
Command and Response Table for Matrix Switcher Commands
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Switching Effect and Duration
NOTES:
• Switching effects can be applied to scaled outputs only.
• Switching effects applied to an output that is paired (such as 5A and 5B) apply to both outputs of the pair.
• The matrix switchers support 1- and 2-digit numeric entries (1*1 or 02*02); responses are 2-digit.
Set effect to cut
EX!
*0SWEF
}
Swef
X!
*0
]
Cut for ties to output
X!
.
Example (DTP CrossPoint 82 4K):
E
1*0SWEF
} ]
Cut for ties to output 1.
Set effect to fade through black
EX!
*1SWEF
}
Swef
X!
*1
]
Fade thru black for ties to output
X!
.
Set effect to seamless fade
EX!
*2SWEF
}
Swef
X!
*2
]
Seamlessly fade for ties to output
X!
.
Set effect to seamless cut
EX!
*3SWEF
}
Swef
X!
*3
]
Seamlessly cut for ties to output
X!
.
View switch effect
EX!
SWEF
} X@]
View current switch effect setting.
Set switching effect duration
EX!
*
X#
EDUR
}
Edur
X!
*
X#]
Sets the effect duration for ties to output
X!
to
X#
.
Example (DTP CrossPoint 86 4K):
E
4*2EDUR
}
Edur4*2
]
Sets the effect duration to 0.2 seconds.
View duration
EX!
EDUR
} X#]
View current setting for ties to
X!
.
Create Ties
NOTES:
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*03%02*03$4*4!.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1- and 2-digit numeric entries (1*1 or 02*02); responses are 2-digit.
Tie input video and audio to output
X$
*
X%
! Out
X%
•In
X$
•All
]
Tie the input
X$
video and audio to
output
X%
.
Example:
1*3!
Out03•In01•All
]
Tie input 1 video and audio to output 3.
Tie input video only to output
X$
*
X%
% Out
X%
•In
X$
•Vid
]
Audio breakaway.
Example:
7*5%
Out05•In07•Vid
]
Tie input 7 video to output 5.
Tie input audio only to output
X$
*
X%
$ Out
X%
•In
X$
•Aud
]
Audio breakaway.
Example:
8*4$
Out04•In08•Aud
]
Tie input 8 audio to output 4.
Untie input video and audio
0*
X%
! Out
X%
•In00•All
]
Untie the video and audio input from
output
X%
.
Untie input video
0*
X%
% Out
X%
•In00•Vid
]
Untie the video input from output
X%
.
Untie input audio
0*
X%
$ Out
X%
•In00•Aud
]
Untie the audio input from output
X%
.
Quick multiple tie
E
+Q
X$
*
X%
! ...
X$
*
X%
$
}
Qik
]
Example:
E
+Q3*4!3*3%3*2$
}
Qik
]
Tie input 3 video and audio to
output 4, tie input 3 video to output 3,
and tie input 3 audio to output 2.
Tie input to all outputs, video and
audio
X$
*! In
X$
•All
]
Example:
5*!
In05•All
]
Tie input 5 video and audio to all outputs.
Tie input to all outputs, video only
X$
*% In
X$
•Vid
]
Audio breakaway.
Example:
10*%
In10•Vid
]
Tie input 10 video to all outputs.
Tie input to all outputs, audio only
X$
*$ In
X$
•Aud
]
Audio breakaway.
NOTE: 0*! clears all video and audio ties, 0*% clears all video ties, 0*$ and clears all audio ties.
Read ties
Read video output tie
X%
%
X$]
Video input
X$
is tied to output
X%
.
Read audio output tie
X%
$
X$]
Audio input
X$
is tied to output
X%
.
NOTE: X! = TP (scaled) and insertion output number
X@ = Switching effect 0 = Cut (default) 2 = Seamless fade
1 = Fade through black 3 = Seamless cut
X# = Effect duration 01 – 50 in 0.1 second increments (Default = 2 = 0.2 seconds)
X$ = Input number 00 – the highest numbered input for your model (00 = untied input)
X% = Output number 00 – the highest numbered output for your model (00 = untied output)