DTP CrossPoint 4K Series Matrix Switchers • Introduction 5
Features
• All-in-one matrix switcher, scaler, and audio DSP — The DTP CrossPoint 4K Series
delivers all of the core functionality of a conventional AV system in a single enclosure,
making it ideal for presentation environments that require multiple displays.
• Audio power amplifier — The SA and MA models feature amplifiers for sound
reinforcement.
• Inputs —
• Six HDMI
• Four or two DTP twisted pair inputs on RJ-45 connectors
• Six stereo balanced or unbalanced audio inputs on captive screw connectors
• Four mic/line audio inputs on captive screw connectors
• Outputs —
• Six or four HDMI
• Four or two independently scaled DTP twisted pair outputs on RJ-45
• One S/PDIF (Sony/Philips Digital Interface Format) digital audio output on an RCA
connector
• Four or two variable audio outputs on captive screw connectors
• (SA and MA models) One variable amplified speaker output
• SA models — 5 mm, 4-pole captive screw connector
• MA models — 5 mm, 2-pole captive screw connector
• Integrated DTP inputs and outputs — Support digital transmission of HDMI or DVI
plus video, control, and audio up to 330 feet (100 meters) over a shielded twisted pair
(STP) cable, providing high reliability and maximum performance on an easily installed
cable infrastructure.
• Supports 4K and UHD signals at all inputs and on both HDMI outputs —
Incoming 4K and UHD signals are supported at all HDMI and DTP inputs, and can be
passed only to the HDMI outputs.
• Selectable scaled DTP output rates — From 640x480 to 1920x1200, including
HDTV 1080p/60, and 4K (4096x2160). The output rate can be individually selected for
each of the two scaled DTP outputs. Available output rates include computer-video up
to 1920x1200, HDTV rates up to 1080p/60, and 4096x2160.
• Compatible with DTP 230 Series and DTP 330 Series, plus XTP Matrix
Switchers — Enables mixing and matching with desktop and wallplate transmitters
and receivers, as well as other DTP-enabled products. The DTP CrossPoint 4K Series
can also be integrated into an XTP System to provide connectivity between presentation
spaces and a larger, facility-wide system.
• DTP outputs are compatible with HDBaseT-enabled devices — The DTP outputs
can be configured to send video and embedded audio signals to HDBaseT-enabled
displays.
TP inputs and outputs are compatible with XTP matrix switcher I/O boards.
• Compatible with shielded twisted pair cable — The DTP CrossPoint 4K Series fully
supports a maximum transmission distance of 330 feet (100 meters) for all compatible
resolutions when used with STP cable. Shielded twisted pair cabling with solid center
conductor sizes of 24 AWG or better is recommended for optimal performance.
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal
performance.
To Next Page
Loading...
