DTP CrossPoint 4K Series Matrix Switchers • Reference Information 171
Mounting Instructions
If desired, rack mount the switcher as follows:
1. Insert the unit into the rack, aligning the mounting bracket holes with those in the rack
(see figure 90).
Figure 90. Installing the Switcher in a Rack
2. Secure the switcher to the rack using the supplied bolts.
Removing and Installing Button Labels
Making labels Using the Button Label Generator Program
The Button Label Generator software creates labels that you can place in the translucent
covers of the input and output selection buttons. You can create labels with names,
alphanumeric characters, or even color bitmaps for easy and intuitive input and output
selection (see Installing Labels in the Buttons on page 173 for the procedure for
removing and replacing the translucent covers).
Installing the Button Label Generator software
The Extron Button Label Generator is available on the Extron website under the Download
tab (see figure 91,
1
). Click the Software link (
2
), and locate and download and install
the program on your PC, using the procedure detailed in Installing the Software on
page 86.
Figure 91. Location of Software on the Website
By default, the installation creates a C:\Program Files\Extron\ButtonLabelGenerator
folder and places the Button Label Generator icon into a group or folder named “Extron
Electronics.”
NOTE: C:\Program Files(x86)\ ... for 64-bit Windows OS.
To Next Page
Loading...
