Extron electronics DTP CrossPoint 4K Series - Logo Button

DTP CrossPoint 4K Series Matrix Switchers • Operation 29
NOTE: See Front Panel Operations, beginning on page 34, for detailed descriptions
of the following operations.
B
Output buttons — See:
• Figure 24 on page 25 and figure 25 on page 26
• The table on page 27 and the continuation table on the previous page
The output buttons have one primary function (❏) and four secondary functions (•):
❏ Select and identify an output for ties.
• Select a preset.
• (Output 2) With the Input 2 button, select input audio configuration mode.
• (Output 4) With the Input 4 button, select control insert configuration mode.
• (Selected outputs, based on matrix size) Select and display the control insert
configuration for output.
Logo Button
C
Logo button (see figure 24 and figure 25)— The Logo button has one function: to
select and identify the Logo mode, in which you can apply a logo to one or more of
outputs 5 through 8 (scaled outputs).
NOTES:
• The switcher has memory space for 16 bitmapped logos.
• Logos are created and saved using the Product Configuration Software (see
the PCS Help file).