Extron electronics DTP CrossPoint 4K Series - Page 36

DTP CrossPoint 4K Series Matrix Switchers • Operation 28
NOTE: See Front Panel Operations, beginning on page 34, for detailed descriptions
of the following operations.
Input and Output button secondary functions (continued)
10x8 matrix
1 2 4 5 6 7 8 10
8x6 matrix
1 2 4
8x4 matrix
1 2 3 4
8x2 matrix
1 2 4
Control
insert
configuration
Action 1 Input 4 and
Output 4 blink:
Select config. mode.
Action 2
(inputs)
10x8
7 through 10:
Select and configure the input.
Action 2
(inputs)
All others
7 and 8:
Select and configure
the input.
Action 2
(outputs)
10x8
5 through 8:
Select and configure the output.
Action 2
(outputs)
8x6
3 through 6:
Select and configure the output.
Action 2
(outputs)
8x4
3 and 4:
Select and configure the
output.
Action 2
(outputs)
8x2
1 and 2:
Select and configure the
output.
Indication Inputs and outputs: Indicate control insert setting.