Extron electronics DTP CrossPoint 4K Series - Set the Clock

DTP CrossPoint 4K Series Matrix Switchers • HTML Pages 159
Set the Clock
Sync to PC
The simplest way to set the switcher clock is to click Sync to PC in the Date/Time
Settings panel (see figure 88). The switcher uploads the time and date information from
the connected computer.
Figure 88. Date/Time Settings Panel — Sync to PC
Set Manually
The Date/Time Settings dialog box (see figure 89) provide a location for viewing and
setting the time functions.
1111111111
22
22222222
33
33333333
44
44444444
55
55555555
Figure 89. Date/Time Settings Dialog Box
Manually set the time as follows:
1. Click Set Manually on the the Date/Time Settings panel (see figure 89,
1
) to open
the Date/Time Settings dialog box.
2. Click the Calendar icon (
, 2
) and select the date in the pop-up calendar tool.
3. Use the keyboard to enter hours, minutes, and seconds or click the up or down
buttons until the desired variable is displayed in the applicable fields (
3
).
4. Select AM or PM in the AM/PM drop-down menu (
4
).
5. Click Apply (
5
).