Extron electronics DTP CrossPoint 4K Series - Input and Output Buttons

DTP CrossPoint 4K Series Matrix Switchers • Operation 27
Input and Output Buttons
NOTE: See Front Panel Operations, beginning on page 34, for detailed descriptions
of the following operations.
Input and Output button primary functions
Action Select input or output for tie being created.
Indication Blink
: potential tie/untie. Amber: video and audio tie
Lit: current tie Green: video only tie
Red: audio only tie
10x8 matrix
1 2
through
10
8x6 matrix
1 2
through
6
8x4 matrix
1 2
through
4
8x2 matrix
1 2
Input and Output button secondary functions
Presets Action Select a preset in Preset mode.
Indication Lit: A preset has been saved to this location.
Input audio
configuration
Action 1
Input 2 and
Output 2 blink:
Select configuration
mode.
Action 2 Inputs: Select and configure the input.
Indication Inputs: Indicate setting.
Background
illumination
Action
Input 1 and Input 2:
Toggle between
background illumination or
buttons unlit.
This table continues on the next page.
A
Input buttons — See:
• Figure 24 on page 25 and figure 25 on the previous page
• The table above and the continuation table on the next page
The input buttons have one primary function (❏) and six secondary functions (•).
❏ Select and identify an input for creating ties or for audio level adjustment.
• Select a preset to recall.
• (Input 2) With the Output 2 button, select input audio configuration mode.
• Display input audio configuration.
• (Input 4) With the Output 4 button, select control insert configuration mode.
• (Selected inputs, based on matrix size) Select and display the control insert
configuration for input.
• (Input 1 and Input 2 only) Toggle background illumination of the buttons on and
off.