DTP CrossPoint 4K Series Matrix Switchers • HTML Pages 152
HTML Pages
The DTP CrossPoint 4K Series can be remotely controlled via:
• SIS commands (see Programming Guide, beginning on page 63)
• The Extron Product Configuration Software and DSP Configurator software (see Matrix
Software on page 85).
• The built-in HMTL page (see below)
This section details using the built-in HTML page to perform a variety of tasks. Subjects
includes:
• Download the Startup Page and View Switcher Status
• Change the Communications Settings
• Update the Firmware
• Set Passwords
• Set the Clock
The switcher can be monitored and configured through its LAN port, connected via a
LAN or WAN, using a compatible Web browser. The browser display has the appearance
of a Web page. This chapter describes the factory-installed HTML page, which is always
available and cannot be erased or overwritten.
NOTES:
• For best results, Extron recommends the following browsers:
• Microsoft
Internet Explorer, version 8.0 or newer, with compatibility mode off
• Mozilla
®
Firefox
®
, version 6 or newer
• Google Chrome™, version 9 or newer
• Apple
®
Safari
®
, version 4 or newer
• If your Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in your Web browser. In Microsoft Internet Explorer, click Tools >
Internet Options > Connections > LAN Settings, uncheck the Use a proxy
server... box, and then click OK.
To Next Page
Loading...
