Need help?Do you have a question about the Extron electronics DTP CrossPoint 84 and is the answer not in the manual?
General| Number of Inputs | 8 |
|---|---|
| Number of Outputs | 4 |
| 4K Support | Yes |
| Video Formats Supported | HDMI, DTP |
| Control Options | RS-232, Ethernet, IR |
| Power Supply | 100-240V AC, 50/60Hz |
| Scaling | Yes |
| Dimensions | 17.5" W x 11.75" D (4.4 cm x 44.5 cm x 29.8 cm) |
Describes the presentation matrix switchers with DTP extension capabilities.
Provides safety warnings and instructions in English for the product.
Details the various notification icons and their meanings used throughout the manual.
Explains the formatting conventions for software commands and device responses.
Informs users where to find product specifications.
Provides a link to the Extron glossary for technical terms.
Provides an overview of the manual's content and scope.
Describes the DTP CrossPoint 84 Matrix Switchers series models and capabilities.
Defines key terms and concepts used in the manual.
Details the key features and functionalities of the DTP CrossPoint 84.
Explains the DTP input and output signal types and transmission characteristics.
Provides a checklist for setting up and installing the matrix switcher.
Details the rear panel connections, ports, and features of the switcher.
Explains video and TP input/output connections and associated switches.
Describes how to connect analog and digital audio inputs and outputs.
Details the various control ports for connecting external devices and systems.
Explains the function and connection of the front panel USB configuration port.
Provides an overview of the front panel controls, buttons, and indicators.
Describes the primary and secondary functions of the input and output buttons.
Guides users through creating new ties, sets of ties, and configurations via the front panel.
Explains how to view the current configuration using the front panel buttons.
Details the three levels of front panel security lock and how to set them.
Describes how to perform a hard reset to restore factory firmware.
Explains how to perform soft system resets (IP settings or absolute reset).
Provides guidance on how to resolve common operating problems.
Recommends using worksheets to record configuration details for each preset.
Details the available ports for remote control and monitoring.
Explains the rear panel RS-232 serial port and its default protocol.
Provides steps to establish a network connection to the switcher.
Describes how to send SIS commands from a host to the switcher.
Lists SIS commands for matrix switching functions with descriptions.
Covers considerations for operating and installing software.
Details the Product Configuration Software (PCS) and its functions.
Describes the DSP Configurator software and its capabilities.
Provides instructions on how to update the switcher's firmware.
Guides on how to launch and connect to the DSP Configurator program.
Explains how to navigate and use the DSP Configurator interface.
Details how to save and recall presets within the DSP Configurator.
Describes the use of pre-configured modular templates for signal paths.
Explains how to create and name custom building blocks.
Provides a tutorial on setting up ducking sources and targets.
Offers procedures for optimizing audio levels and gain structure.
Guides on setting up the system's input and output gain structure.
Details how to set mic input and mix-point levels for optimal audio.
Instructions for accessing the HTML interface and viewing status.
Explains how to modify Ethernet and RS-232 communication settings.
Provides steps to download and install firmware updates via HTML.
Guides on setting administrator and user passwords through the web interface.
Details how to set the switcher's internal clock manually or via PC sync.
Reference table for SIS commands and their responses.
Details SIS commands for controlling audio trim, gain, and mixing.
Explains SIS commands for managing audio group masters.
Provides guidelines for mounting the switcher in a rack.
Step-by-step instructions for rack-mounting the unit.
Procedure for removing and installing front panel button labels.
Guides on using software to create custom button labels.
Instructions for installing the Extron Button Label Generator software.
Details on using the software to create and print button labels.
To Next Page
