DTP CrossPoint 84 Series Matrix Switchers • Matrix Software 114
Keyboard Navigation
The DSP Configurator program is fully navigable using the computer keyboard. Some
keyboard navigation behavior matches Windows standards, while other behaviors are
specific to the DSP Configurator program.
When the program is started, the cursor focus is in the upper left corner of the program
audio input (line signal processor chain (see figure62,
A
). The input 1 Gain block is
highlighted green [ ]).
BB
BBBB
BBBB CC
CCCC
CCCC
*
* This output 1 amplifier block is not present on non-IPCP models.
Figure 62.
DSP
Configurator Program Window
Standard Windows navigation
The keyboard keys navigate and function as follows:
• <Tab> key —
Sequentially jump among major segments of the DSP Configurator program. From the
audio input chains (
A
), sequential jumps are in the following order:
• AV matrix block (
B
)
• Output processor chains and mixers (
C
)
• <Shift>-<Tab> key combination —
Reverses the direction of the <Tab> key function.
58
To Next Page
Loading...
